August 6, 2010
Theoretical and Experimental Particle Velocity in Cold Spray
In an effort to corroborate theoretical and experimental techniques used for cold spray particle velocity analysis, two theoretical and one experimental methods were used to analyze the operation of a nozzle accelerating aluminum particles in nitrogen gas. Two-dimensional (2D) axi-symmetric computations of the flow through the nozzle were performed using the Reynolds averaged Navier-Stokes code in a computational fluid dynamics platform. 1D, isentropic, gas-dynamic equations were solved for the same nozzle geometry and initial conditions. Finally, the velocities of particles exiting a nozzle of the same geometry and operated at the same initial conditions were measured by a dual-slit velocimeter. Exit plume particle velocities as determined by the three methods compared reasonably well, and differences could be attributed to frictional and particle distribution effects.
Key words: aluminum, CFD, modeling, nozzle, velocity measurement
Originally published at Journal of Thermal Spray Technology (Volume 20, pages 425–431, 2011)
By Victor K. Champagne, Dennis J. Helfritch, Surya P G. Dinavahi, Phillip F. Leyman
