Cold spraying is an emerging additive manufacturing technology that can be used to repair metals and alloys. The adhesion strength […]
Filter by categories
May 10, 2024
Influence of Deposition Parameters on the Formation of Surface Cracks in Segmented Aps-Tbcs
Thermal barrier coating system (TBCs) prepared using the Air plasma spray (APS) method are widely recognized as the most prevalent […]
April 29, 2024
Understanding the Impact of Binary Plasma Gas Mixtures in Plasma Spraying
In plasma spraying, H2 or N2 is commonly added to the primary Ar plasma which may increase the specific enthalpy, […]
April 29, 2024
Development and Understanding of CMAS Coating on YSZ Using APS Technique
The ingestion of siliceous particulate debris into the gas turbine engines during operation caused the deposition of so-called CMAS (calcium-magnesium-alumino-silicate) […]
April 22, 2024
Improving Coating Repeatability by Parameter Adaptation Through Process Monitoring, Gaussian Process Models and Kalman Filters
Producing coatings of repeatable quality is a crucial objective of any coating process, including atmospheric thermal spraying (APS). With the […]
April 19, 2024
Impact Of Molten Salts Composition On The Corrosion Behavior Of Nimocr And Conicral Coatings On L-PBF 316L Stainless Steel For CSP Plants
The high-temperature corrosion performance of NiMoCr and CoNiCrAl coatings produced by high velocity oxy-fuel (HVOF) on laser powder bed fusion […]
April 11, 2024
Flash Boiling Atomization of Suspension for Application of Suspension Plasma Spraying
Suspension Plasma Spraying (SPS) is a thermal spray technique used to deposit sub-micron and nano-sized particles. The liquid is evaporated […]
April 4, 2024
Role Of Nitrogen And Helium Gases On Microstructure And Anisotropic Mechanical Properties Of Cold-Sprayed Scalmalloy Deposits
Aluminum alloys (Al) produced by fusion-based additive manufacturing techniques exhibit limited strength due to undesirable grain growth, porosity, and thermal […]
April 4, 2024
Effect Of Spray Parameters On The Microstructure, Solid Lubricant Phase Retention, And High-Temperature Tribological Performance Of Plasma Sprayed YSZ/Baf2 Composite Coatings
This report deals with the development of a self-lubricated plasma sprayed YSZ/BaF2 coating taking the following into account: (i) the […]
