Shot peening is a manufacturing method that makes indentations on a components surface by impacting it with small steel balls […]
Filter by categories
January 25, 2014
Study on Stainless Steel 316L Coatings Sprayed by High Pressure HVOF
The High-Velocity Oxy-Fuel (HVOF) technology has been widely used to deposit cermet, metals, and alloy coatings. However, the high temperature […]
November 10, 2012
Engineering HVOF-Sprayed Cr3C2-NiCr Coatings: The Effect of Particle Morphology and Spraying Parameters on the Microstructure, Properties, and High Temperature Wear Performance
Chromium carbide-based thermally sprayed coatings are widely used for high temperature wear applications (typical temperature range from 540 to 900 […]
January 8, 2012
A New Standard for Peening Process Control and Operator Interface
Shot Peening has been around for over 75 years and for the most part, the way the process is characterized […]
December 15, 2011
Engineering A New Class Of Thermal Spray Nano-Based Microstructures From Agglomerated Nanostructured Particles, Suspensions And Solutions: An Invited Review
From the pioneering works of McPherson in 1973 who identified nanometre-sized features in thermal spray conventional alumina coatings (using sprayed […]
January 8, 2011
Implementation Of Velocity Measurement As Intensity Verification In Production
The current method for determining shot peening intensities and to verify process parame-ters in production is to use Almen strips […]
August 6, 2010
Theoretical and Experimental Particle Velocity in Cold Spray
In an effort to corroborate theoretical and experimental techniques used for cold spray particle velocity analysis, two theoretical and one […]
January 30, 2009
Improved Thermal Spray Consistency Via Plume Sensors -An Aerospace Perspective
Plume Sensor Technology can assist the conventional thermal spray shop to improve process consistency and output for many different process […]
May 15, 2008
Pre-Oxidation And TGO Growth Behaviour Of An Air-Plasma-Sprayed Thermal Barrier Coating
In thermal barrier coating (TBC) systems, spinel and nickel oxide formed in an oxidizing environment are believed to be detrimental […]
