Aircraft gas turbine blades operate in aggressive, generally oxidizing, atmospheres. A solution to mitigate the degradation and improve the performance […]
Filter by categories
September 11, 2025
Modeling Of The Shot Peening Of A Nickel Alloy With The Consideration Of Both Residual Stresses And Work Hardening
Shot peening of turbine disk engines is performed in the aerospace industry in order to enhance fatigue life. This surface […]
September 11, 2025
High Density Ceramic Shot For Peening Application
Ceramic shots are used in a large range of industrial peening applications, such as automotive suspension springs, transmission gears, aluminium […]
September 11, 2025
Influence Of Process Parameters On The Microstructure And Adhesion Of Glaze-Based Coatings
Developing coatings for specific applications involves several challenges, including the formation of defects and undesired chemical reactions during spraying, both […]
May 14, 2025
Advancing Shot Peening Quality Control With The Shotmeter: A Modern Approach To Intensity Measurement
Shot peening is a critical surface treatment process that enhances material properties by inducing compressive residual stress, improving fatigue life, […]
May 5, 2025
AccurasprayHub: Leveraging AI and Machine Learning to Define and Optimize Process Windows in Thermal Spray Operations
Consistent coating quality in thermal spray processes is challenging due to inherent complexity, operator-dependent controls, and evolving equipment conditions. While […]
April 1, 2025
The Role of HVAF Nozzle Design and Process Parameters on In-Flight Particle Oxidation and Microstructure of NiCoCrAlY Coatings
Increasing demand to deposit dense and oxidation-resistant bond coats requires reliable and efficient deposition techniques. High-Velocity Air-Fuel (HVAF), among other […]
April 1, 2025
Investigation Of The Corrosion Performance Of HVOF-Sprayed WC-Cocr Coatings Applied On Offshore Hydraulic Equipment
This study investigates the corrosion and erosion-corrosion performance of HVOF-sprayed WC-10Co-4Cr coatings for offshore hydraulic applications. By tuning kerosene (18.1–25.3 l·h−1) […]
March 6, 2025
Repair of Single-Crystal CMSX-4 Using the High Velocity Air Fuel Process
Turbine blades in aircraft engines and land-based gas turbines are exposed to harsh environmental conditions that make them susceptible to […]
